Liberty New Year windows 2016

For the New Year Liberty windows, we worked with Liberty and Gus & Stella to produce this vibrant explosion of colourful Liberty prints. We created props incorporating movement and screens to showcase Gus & Stella’s animations. Three props used motorised elements – an oscillating tie and oven glove and a lady with a spinning bow on her dress. It all added up to a bright and vibrant start to the year!

Liberty light installation – Christmas 2015

For Christmas 2015, we created a spectacular illuminated installation in the Liberty central atrium. From the top of our central pole, beautiful 10m long strips of metallic Liberty fabric were interspersed with over 400 metres of lights. The strips and lights dropped down 3 floors from the top of the pole. A specially made 5m aluminium ring was suspended at the bottom of the installation. The strips and lights were attached to the ring and carefully adjusted to create a pleasing outward and upward swoop.

Giant Sprouts

These giant sprouts were used for the John Lewis Christmas press show 2015. We made a huge wooden chopping board as a podium and added our oversize knife prop to complete the scene. People attending the show had great fun posing with the giant sprouts. People either love or hate sprouts – but we think they loved these!

Liberty Christmas 2014

VM&D3

For the Liberty Christmas scheme, we designed and made a 16.7m tall ships mast in the central atrium. This huge structure was made in several sections and had to be assembled on site with the help of a team of abseilers. Liberty print sails were rigged from the three yardarms and a gift filled crows nest featured at the top. The wood finish was carefully matched to the timbers in the building. Copper leaf decoration was used extensively throughout the mast – this complemented our large handmade replica Liberty coins strung on the mast and throughout the store. To continue the ship theme, we designed and created hundreds of copper and Liberty print sailing ships to be hung from the ceilings on the ground floor. We are delighted to say that this project was a finalist in the VM & Display awards 2015 – Best Christmas Interior.

Liberty 140th Anniversary Maypole

To celebrate the 140th anniversary of Liberty in May 2015, we designed and created a spectacular 16m tall maypole.  The giant Liberty print ribbons radiated out from just below a huge floral display and down to 3 floors below.  A vast array of Liberty fabrics were used for the ribbons – around 1 for each of the 140 years. This huge structure was made in several sections and had to be assembled on site overnight with the help of a team of abseilers.

 

 

John Lewis Oxford Street installations

As part of the refurbishment of the lighting department in John Lewis Oxford Street, we designed and created two installations. Firstly, we created a faux white brick wall with the skyline of London ‘drawn’ in electrical cable and fittings. Measuring approx. 4.5m x 3m, this wall creates a striking entrance to the department. The second installation was to create a chandelier of lightbulbs – some lit and some not. The chandelier is suspended from the ceiling in the lighting department. As well as displaying the products effectively, it is a wonderful focal point.

 

Liberty London Fashion Week windows

These abstract terrarium frames with clear perspex panels were individually designed and made to fit the Liberty windows. Paired with the Liberty prints and fashion, they completed a botanical look for London Fashion Week 2015.

Toadstools

This display of oversize toadstools was a permanent display in the haberdashery department in John Lewis Oxford Street. After our designs were approved, the toadstools were carved from polystyrene before covering with fabrics from the store’s own range. Oversize buttons and pins were made especially for this project to create the dots on the top of the toadstool.

Postboxes

We produced around 30 of these pillarboxes – one for each John Lewis department store. They were full sized and constructed from plastics & wood. For the tops, a mould was made of our sculpted original – casts were then made for each pillar box. The boxes were used for letters to Santa – so the lids had to be removable to collect the letters & send them on to the North Pole!

Atrium – Spring Flowers

These drops of beautiful spring flowers were used in 4 branches of John Lewis (including Peter Jones in Sloane Square). Each of the large flowers was hand made and painted before being carefully strung in a designed sequence.

Atrium – Abstract Installation

These wedge shapes were interpreted in all sorts of ways – some thought they resembled flocks of seagulls, whilst others imagined grass cuttings flying out of a lawnmower.
After we had designed and made the pattern for the wedge shapes, they were vacuum formed in white or clear material. Some were then coloured green. Finally, they were then strung carefully following a pre-designed arrangement before hanging in store.

Atrium – Christmas Mistletoe

We designed the green mistletoe decoration after being inspired by the way this plant grows on trees. The mistletoe attaches itself to the tree and grows outwards, forming a spherical mass of intertwined foliage. We thought this shape would be perfect as a Christmas decoration and would work beautifully when hung with traditional Christmas baubles. After designing and prototyping this decoration, we worked on the configuration of baubles and mistletoe for the final hangings.

Seasonal Tree

This project ran for several months in most of the John Lewis department stores.
The same basic tree was used throughout the project, but we created a different look for for each seasonal promotion. First was Valentines day, followed by gifting, Mothers day, Easter, Fathers day, & Halloween.

Barbara Hepworth replica sculpture

In celebration of John Lewis’ 150th anniversary, we were commissioned to make a sculpture based on the iconic Barbara Hepworth ‘Winged figure’. The original sculpture takes pride of place above the entrance of John Lewis Oxford street. Our version was displayed in the Oxford Street windows. To recreate the aluminium finish of the original, we used a lightweight aluminium composite material. We criss-crossed steel rods through our sculpture to complete the look.

White Product Installation

To mark the launch of the food hall in John Lewis Oxford Street, we designed and created these displays of white products. After designing the layout, each bottle, jar, box and tin had to be sprayed white and then arranged in the custom made shelving on site.

Giant Letters

These giant letters were originally used to showcase top Christmas toys at a press event.
They were so successful that the idea was used on the shop floor as part of the Christmas scheme.

Bark Effect Moulding & Casting

Our brief was to create a bark edge for the shelves in the John Lewis Christmas windows. After sculpting an original section of bark, we made several moulds and began casting. Over 300 pieces were finally made and each was hand painted to complete the effect.